ファイル:1998 OR2 Radar.gif

高解像度版はありません。

1998_OR2_Radar.gif (400 × 400 ピクセル、ファイルサイズ: 1.08メガバイト、MIME タイプ: image/gif、ループします、10 フレーム、1.5秒)

このファイルは、ウィキメディア・コモンズから呼び出されています。
このファイルは、他のプロジェクトで使用されている可能性があります。
このファイルの解説やノートへの記入、履歴などの詳細の確認は、ウィキメディア・コモンズのファイルページ（ノート/履歴/ログ）を使用してください。

ウィキメディア・コモンズのファイルページにある説明を、以下に表示します。

概要

解説1998 OR2 Radar.gif	English: Animation of delay-Doppler images from Apr 18 UT.
日付	2020年4月18日
原典	http://www.naic.edu/~pradar/press/1998OR2.php
作者	Arecibo Observatory/NASA/NSF

ライセンス

	このファイルはアメリカ航空宇宙局（NASA）によって作成されたものです。NASAの著作権の方針では、特記事項が無い場合、NASAの資料はパブリックドメインとなります。（詳しくはTemplate:PD-USGov、NASAの著作権の方針について（英語）又はジェット推進研究所(JPL)の画像使用に関するガイドライン（英語）をご覧ください。）
	注意事項: NASAのロゴや記章・紋章の使用は米国法14 CFR 1221で制限されています。 NASA の公式ウェブサイトには、アメリカの宇宙開発局ではないソ連・ロシア連邦宇宙局からの画像も数多く収録されています。これらのファイルや資料は必ずしもパブリックドメインであるとは限りません。ハッブル宇宙望遠鏡による資料は、宇宙望遠鏡科学研究所(STScI)による提供である場合パブリックドメインではない可能性があります。ハッブル宇宙望遠鏡公式サイトの著作権ポリシー（英語）。詳しくは{{PD-Hubble}}や{{Cc-Hubble}}、{{Spacetelescope.org}}もご覧ください。太陽・太陽圏観測衛星（SOHO, ESA & NASA）と共同のプロジェクトでは、宇宙探査用のロケットからの画像やデータを学校教育や非営利的な目的で使用することを容認していますが、その際は適切な著作権者帰属表示が求められています。（SOHOによる著作権ポリシー（英語））宇宙の今日の一枚(APOD)のサイトに掲載された画像は、著作権保護の対象になっている可能性があります。APODについて（英語）

ファイルの履歴

過去の版のファイルを表示するには、その版の日時をクリックしてください。

	日付と時刻	サムネイル	寸法	利用者	コメント
現在の版	2020年4月23日 (木) 17:26		400 × 400 (1.08メガバイト)	Nrco0e	Uploaded a work by Arecibo Observatory/NASA/NSF from http://www.naic.edu/~pradar/press/1998OR2.php with UploadWizard

ファイルの使用状況

以下のページがこのファイルを使用しています:

(52768) 1998 OR2

グローバルなファイル使用状況

以下に挙げる他のウィキがこの画像を使っています:

ar.wikipedia.org での使用状況
- (52768) 1998 OR2
arz.wikipedia.org での使用状況
- (52768) 1998 OR2 (كويكب)
be.wikipedia.org での使用状況
- (52768) 1998 OR2
en-two.iwiki.icu での使用状況
- (52768) 1998 OR2
- List of asteroid close approaches to Earth in 2020
eo.wikipedia.org での使用状況
- (52768) 1998 OR2
eu.wikipedia.org での使用状況
- (52768) 1998 OR2
fi.wikipedia.org での使用状況
- (52768) 1998 OR2
hr.wikipedia.org での使用状況
- (52768) 1998 OR2
pl.wikipedia.org での使用状況
- (52768) 1998 OR2
ru.wikipedia.org での使用状況
- (52768) 1998 OR2
sv.wikipedia.org での使用状況
- 1998 OR2
uz.wikipedia.org での使用状況
- Asteroid OR2 1998
vi.wikipedia.org での使用状況
- (52768) 1998 OR2
www.wikidata.org での使用状況
- Q8331812

メタデータ

このファイルには、追加情報があります (おそらく、作成やデジタル化する際に使用したデジタルカメラやスキャナーが追加したものです)。

このファイルが元の状態から変更されている場合、修正されたファイルを完全に反映していない項目がある場合があります。

GIFファイルのコメント

FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -6.45466400328587e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -1.82322992259287e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -6.50443183758398e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -1.81660055886823e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -3.99515300841813e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -8.91766944732808e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -9.82426371365364e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -8.59829185628769e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -5.33652837475529e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional 0 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.

ファイル:1998 OR2 Radar.gif

概要

ライセンス

キャプション

このファイルに描写されている項目

題材

(52768) 1998 OR2

著作権の状況

パブリックドメイン

成立日

18 4 2020

メディアタイプ

image/gif

チェックサム

9d1afd27a456ca9a88cd538f75ce6e3c02064534

データサイズ

1,134,988 バイト

継続時間

1.5 秒

全高

400 ピクセル

全幅

400 ピクセル

ファイルの履歴

ファイルの使用状況

グローバルなファイル使用状況

メタデータ